click on image for larger view

Don't Have Adobe Acrobat Reader?
     
ITEM # PART # DESCRIPTION
12 2104 P-CLIP (3/8", Plastic) - Use to fasten the foam-insulated part of a 2-wire cable to the Body
13 2700 SCREWS (#8, 11/16", Phil Pan-Flat Head) - Use to fasten the Sideplates
14 2260 SCREWS (#6, 7/16", Phil Pan-Flat Head) - Use to fasten the Sideplates and the Lanyard of the Clevis Pin
15 1601 PLUG (3-Pin, Female, 2-Wire) - Aquabot / Storm / Turbo / Tempo / T2, Aquamax, Aquamax Jr, All Jet / Rover
16 S7930 EZ-SWIVEL (For 2-wire Cable) - Can be used on any 2-wire Cable Assembly
17 A1641 CABLE ASSY. (2-Wire, 40 Foot, Float Balls) - Pool Rover Junior
17 A16240 CABLE ASSY. (2-Wire, 40 Foot, Floating) - Pool Rover, ThunderJet AG
17 A16250 CABLE ASSY. (2-Wire, 51 Foot, Floating) - Pool Rover Plus, AquaJet, ThunderJet IG
25 S8730 JET VALVE ASSEMBLY (Does not include Extension Brackets) - All Jet and Rover cleaners
26 2002BL-PR BODY ASSY. (Blue, with Lock Tabs, no Valve Housing) - Pool Rover Junior
26 A22000J BODY ASSY. (White, with Lock Tabs, no Valve Housing) - Pool Rover
26 2002-PR BODY ASSY. (White, with Lock Tabs, no Valve Housing) - Pool Rover Plus
2400 NAIL PLUG (White, Plastic) - Use to plug small holes on the Body Assembly
27 2251 SCREW (8-18 x 3/4, Phil Small Head) - Use to fasten the sides of the Jet Valve Assembly together
29 S8731 VALVE SPRING (St.Steel, Hinge-spring, Use inside of Jet Valve Assembly) - All Jet and Rover cleaners
32 3476 EXTENSION BRACKET (4 Holes, For Jet Valve) - Pool Rover, ThunderJet AG
32 8729 EXTENSION BRACKET (5 Holes, For Jet Valve) - Pool Rover Jr / Plus, AquaJet, ThunderJet IG, JetMax / Jr
33 8728 VALVE FLAP (White, Plastic, Use inside of Jet Valve Assembly with Valve Lock) - All Jet and Rover cleaners
34 8727 VALVE LOCK (White, Plastic, Use inside of Jet Valve Assembly with Valve Flap) - All Jet and Rover cleaners
35 8730 JET VALVE HOUSING (Black, Plastic, only housing, no Extension Brackets) - All Jet / Rover cleaners
36 SP9204BL LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lids to base of cleaners
37 3394 BRACKET (For Center Wheel on Jet and Rover units) - Use to hold movable small black wheel
38 2303 SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly
39 7133 LOCK-NUT (Nylon Insert, Hex) - Use to fasten the Screws of the Lock-Tabs
40 1626 GROMMET (Rubber, Use around Cable Assembly on Body) - AquaJet, Pool Rover / Jr / Plus, JetMax / Jr
41 S3477 FOAM BLOCK (w/ Slot & Bracket, 4" Square Float) - Pool Rover Plus, AquaJet, ThunderJet IG, JetMax / Jr
3477 BRACKET (For Foam Block with Slot) - Pool Rover Plus, AquaJet, ThunderJet IG, JetMax / Jr
42 2660 BUSHING (Black, Plastic, Use around Poly-Tube on Body) - Pool Rover Junior, Pool Rover, Pool Rover Plus
45 3396F SIDEPLATE (Fuscia) - Pool Rover Junior
45 3396BL SIDEPLATE (Blue) - Pool Rover
45 S3396BL-Right SIDEPLATE (Blue, Right side with Jet Nozzle) - Pool Rover Plus
45 S3396BL-Left SIDEPLATE (Blue, Left side with Jet Nozzle) - Pool Rover Plus
53 3393BK SMALL WHEEL (Black, For under Sideplate) - Pool Rover Plus, ThunderJet IG, AquaJet, JetMax, JetMax Jr
59 3607 WASHER (Use on All Pulley Assemblies, Use on Movable Axle of Jet / Rover cleaners, Rounded edges facing inward)
60 A6005-03 PUMP MOTOR (Aquabot T2, T4, Pool Rover Plus, ThunderJet IG, AquaJet, JetMax, PHV 100 / 200)
60 A6005 PUMP MOTOR (Pool Rover Junior, Pool Rover, ThunderJet AG)
61 4402 PROPELLER - Aquabot Turbo T2/T4, AquaJet, JetMax/Junior, Pool Rover/Plus/Junior, ThunderJet cleaeners
62 2302 SCREWS (#8, 3/4", Phil Pan Head) - Use to fasten the Pump to the Jet Valve on All Jet and Rover cleaners
63 6027 IMPELLER (Red) - Aquabot T2 / T4, Pool Rover Plus, ThunderJet IG, AquaJet, JetMax / Jr, PHV 100 / 200
64 6028 IMPELLER HOUSING (Red) - Aquabot T2 / T4, Pool Rover Plus, ThunderJet IG, AquaJet, JetMax, PHV 100 / 200
65 300096 TUBING (Clear PVC, 5/16"ID x 1/2"OD) - Use to divert water from the Impeller to the to the Jet Bracket
85 4501 SCREW (8-18 x 1/2, Phil Pan Head) - Use to fasten the Extension Brackets to the Jet Valve Housing
86 SP5474 SHRINKABLE BUTT CONNECTORS (Light Blue, crimp closed and heat shrink to seal)
87 SP1617 SHRINK TUBE (5/16", Blue) - For sealing 2-wire connections, use under Heat Shrink 1619
87 SP1619 SHRINK TUBE (1/2", Black) - For sealing 2-wire connections, use over Heat Shrink 1617
SP1611 SHRINK TUBE (3/4", Blue) - For sealing the Cable insulation below the P-Clip at the Handle Assembly
89 2670C TIMER 90 SECOND (Front Dial, 2hr Auto-Off, No Reset Switch) - Pool Rover Plus, ThunderJet IG, AquaJet
90 2684 WHEEL (Blue, Plastic, 6") - Pool Rover
90 S2670 WHEEL ASSEMBLY (Black, Rubber, 6") - Pool Rover Jr, Pool Rover Plus, ThunderJet IG, AquaJet, JetMax
91 11067 STAR WASHER (For end of axle) - Use for All Jet and Rover cleaners
92 3603 WASHER (Nylon, Flat) - Use for All cleaners on the end of Wheel or Wheetube Assembly
93 S1019-12 TUBE (Black, Plastic, 3" Oval, 12" Long) - Pool Rover / Plus, ThunderJet AG / IG, AquaJet, JetMax Junior
94 S3420-1H AXLE (Fiberglass, 16.5"x1/2"OD, 1 hole, Front / Rear) - Pool Rover Jr, ThunderJet AG / IG, AquaJet, JetMax Jr
94 S3421-2H AXLE (White, Fiberglass, 18" x 1/2"OD, 2 holes, Rear) - Pool Rover
94 3421 AXLE (White, Fiberglass, 18" x 1/2"OD, no holes, Front) - Pool Rover
94 S8736 AXLE ASSEMBLY (White, Fiberglass, w/ Switching-Wedge) - Pool Rover Plus, ThunderJet IG, AquaJet
95 11002 CLEVIS PIN (St.Steel, 1/4" x 2.232") - All Pool Rover cleaners, AquaJet, JetMax, JetMax Junior
95 700016 CLEVIS PIN (St.Steel, 1/4" x 2.375")
96 2679 LANYARD (Black, Plastic, To tie onto Clevis Pin, attached to Tube or Body) - All Jet and Rover cleaners
101 8100 FILTER BAG (Fine) - Aquabot / Turbo / T2 / T4 / Plus RC, Aquamax Jr, PHV 100/300, small Jet / Rover, UMAX **
101 8200 FILTER BAG (Mesh) - Aquabot / Turbo / Plus RC, Aquamax Jr, PHV 100/300, small Jet & Rover, UMAX **
103 S5305 FILTER SCREEN (Blue, Wrap-around) - Older Pool Rover units
103 5311 FILTER SCREEN (NEW, Blue, Bowl-shaped) All AquaJet, JetMax, and Pool Rover units
105 A9200X BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot, small Jet / Rover, Aquamax Jr, Ultramax ***
105 A9200XWB BOTTOM LID ASSY. (Blue, W-shaped Wire Frame) - Pool Rover Junior, Power Handi-Vac 100 / 300
106 9305BL INTAKE VALVE FLAP (Blue Plastic) - Fits into Intake of All small # 9200 Bottom Lids
108 S3103 H-FLOAT (Foam, Plastic, with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough
109 SP3104 SIDE POCKET FLOATS (White, Foam Blocks) - Put in Bottom Lid if wall-climbing is not high enough
110 7071 POWER SUPPLY (3-Prong Male, 60s Dial-Timer, 2hr Auto) - Pool Rover Jr, Pool Rover, ThunderJet AG
110 7075C POWER SUPPLY (3-Prong Male, 90s Dial-Timer, 2hr Auto) - Pool Rover Plus, ThunderJet IG, AquaJet
111 7108 SOCKET ASSY. (3-Pin, Male, 2-Wire) - Aquabot / Turbo / T2, All Jet and Rover cleaners, Aquamax / Jr
112 7206 FUSE HOLDER (MINI, Phillips Head style) - Use for All Power Supplies with Dial Timers
7207 FUSE (2.5 Amp, MINI, 250 Volt, Slow- Blow) - All Residential cleaners with Dial Timer Power Supply
114 7208 ON / OFF SWITCH (Thin, Red, 3-Wire) - Use for Power Supply with Dial or Digital Timer
117 7041A HANDLE (Plastic, with Hardware) - Use on All Power Supplies except Ultramax
118 7102 CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - Use on All Power Supplies
119 7131 TIMER 60 SECOND (Front Dial, 2 hour Automatic shut-off) - Pool Rover / Junior, ThunderJet AG
119 7132A TIMER 90 SECOND (Front Dial, 2hr Auto-Off, No Reset Switch) - Pool Rover Plus, ThunderJet IG, AquaJet
119 7271 TIMER 90 SECOND (Front Dial, 2hr Auto-Off, 5 Wire, Reset Switch) - AquaJet  ** only when specified by Aqua Products
119 7271D DIGITAL TIMER (Front Dial, 90-second, 2hr Auto-Off) - NEW Digital Timer available for most Jet units
800070 NOVUS 2 Plastic Polish 24 oz. Bottle
1609 TIE (Blue, #4, Plastic, reusable) - Use for coiling the Cable Assembly among other things