|
|
click on image for larger view |
|
Don't Have Adobe Acrobat Reader? |
|
|
|
| 1 |
A10000WT |
HANDLE ASSEMBLY (Bright White, Bracket included) - Aquabot Turbo T / T4RC (Version 2006 - Present) |
| 2 |
S1100WT |
HANDLE BRACKET (Bright White) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 8 |
1105 |
SCREW (10-32, 7/8", Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly |
| 9 |
2701 |
SCREW (#8, 11/16", Phil Pan Head) - Use to fasten Pump Motor |
| 12 |
2109 |
P-CLIP (Blue, Coated Steel) - Use to fasten the Cable to the Handle of the Aquabot Turbo T / T-Solo / T2 / T4RC |
| 13 |
2700 |
SCREWS (#8, 11/16", Phil Pan-Flat Head) - Use to fasten P-Clips, and Drive Motors |
| 14 |
2260 |
SCREWS (#6, 7/16", Phil Pan-Flat Head) - Use for P-Clips, Outlet Top, and H-Float |
| 15 |
1640E |
PLUG (7-Pin, Male, used for 5-Wire Cable) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 16 |
S7935 |
EZ-SWIVEL (For 5-wire Cable) - Can be used on 7-wire Cable Assembly |
| 17 |
A16675 |
CABLE ASSEMBLY (5-Wire, 75 Ft., Floating) - Aquabot Turbo T4RC (Version 2006 - Present) |
|
2250WT |
OUTLET RING (Bright White, Ring only, does not include Top dome) |
| 25 |
2230WT1 |
OUTLET TOP (Bright White, Top dome only, does not include bottom Ring) |
| 26 |
A2005BL2 |
BODY ASSEMBLY (Blue, with Lock Tabs, Outlet Ring, Inserts) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 30 |
SP3402 |
LOCK-NUTS (Hex, Nylon insert, for various uses: Sideplate Bolts, Anti-Roll Brackets, Pole Handle Assy.) |
| 36 |
SP9204W |
LOCK-TABS (White, Plastic) - For All Body Assemblies, used to hold Bottom Lids to base of cleaners |
| 38 |
2303 |
SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly |
| 39 |
7133 |
LOCK-NUT (Nylon Insert, Hex) - Use to fasten the Screws of the Lock-Tabs |
| 40 |
1628 |
GROMMET (Rubber) - Use around Cable Assembly on Body |
| 42 |
2661 |
BUSHING (Black, Plastic, Use at end of Wheel Tube Axle) |
| 45 |
S3400WT6H |
SIDEPLATE (Bright White, 4 holes for Bolts) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 49 |
SP3401 |
SCREW (Bolts, Long, For Sideplate) - Aquabot Turbo T4RC |
| 51 |
2600BKT2 |
BUSHING (Black, Plastic) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 55 |
3700 |
LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body Assembly Pin Support |
| 56 |
3506 |
STEPPED SLEEVE ROLLER (White, Thicker end supports Drive Belts, Install on upper Sideplate legs) |
| 57 |
SP3302 |
DRIVE BELTS (Tan) |
| 58 |
A3605 |
PULLEY ASSEMBLY (2.75" long) |
|
3607 |
WASHER (Use on Pulley Assembly, Rounded edges facing inward) |
|
3397WT |
NOZZLE BRACKET (White, Supports Drive Track, holds Nozzle in place) |
|
3398WT |
NOZZLE (White, Snaps into Nozzle Bracket, connects to Poly Tubing for power washing under cleaner) |
| 60 |
A600503 |
PUMP MOTOR (Inludes Propeller, Impeller and Impeller Housing) |
| 61 |
4402 |
PROPELLER (Black, Plastic, D-shaped insert) |
| 63 |
6027 |
IMPELLER (Red) |
| 64 |
6028 |
IMPELLER HOUSING (Red) |
| 65 |
300096 |
TUBING (Clear PVC, 5/16"ID x 1/2"OD) - Use to divert water from the Impeller to the Nozzle Bracket |
| 80 |
A8546 |
DRIVE MOTOR (Blue, Master Motor, bare wire leads for Slave Motor) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 80 |
A8547 |
DRIVE MOTOR (Green, Slave Motor, bare wire leads for Master Motor) - Aquabot Turbo T4RC (Version 2006 - Present) |
|
3101 |
FLOAT (Place under Drive Motor) |
| 86 |
SP5474 |
SHRINKABLE BUTT CONNECTORS (Light Blue, crimp closed and heat shrink to seal) |
| 87 |
SP1617 |
SHRINK TUBE (5/16", Blue) - For sealing 2-wire connections, use under Heat Shrink 1619 |
| 87 |
SP1619 |
SHRINK TUBE (1/2", Black) - For sealing 2-wire connections, use over Heat Shrink 1617 |
| 88 |
1625 |
SHRINK TUBE (3/4", Black) - For sealing all medium sized connections at the Junction Box |
| 89 |
SP1614S |
SHRINK TUBE (1-1/2", 2.5", Black) - Service kit for sealing large Cable connections |
| 89 |
SP1614 |
SHRINK TUBE (1-1/2", Black) - For sealing wide connections at the Junction Box and Cable Assembly |
| 90 |
A38010 |
WHEEL TUBE ASSEMBLY (NEW, Aquabot Turbo T4RC) (Version 2006 - Present) |
|
SP11087 |
CLUTCH SPACER (2 pieces per Wheel Tube) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 91 |
11059 |
RETAINING RING (C-Clip, requires Snap-Ring Pliers) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 92 |
3603 |
WASHER (Nylon, Flat) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 97 |
SP3018BL |
SUPER EZ-BRUSHES (Blue, cut in half, Short) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 99 |
3203 |
DRIVE TRACK with TRACTION TABS (Blue) |
| 101 |
8100 |
FILTER BAG (Fine, for small debris) |
| 101 |
8200 |
FILTER BAG (Mesh, for large debris) |
| 103 |
SP5310 |
FILTER SCREEN (NEW, Blue, Folding Cage with Attachment Strings) |
| 103 |
A5080 |
FILTER SCREEN (Blue, Rounded cage) |
| 105 |
A9200XWB |
BOTTOM LID ASSEMBLY (Blue, W-shaped Wire Frame) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 106 |
9305BL |
INTAKE VALVE FLAP (Blue Plastic) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 108 |
S3103 |
H-FLOAT (Foam, Plastic, with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough |
| 110 |
A7181C |
POWER SUPPLY (7-Pin, 7hr External Digital Timer) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 111 |
7149E |
SOCKET ASSEMBLY (7-Pin, Male, 5-Wire) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 112 |
7206 |
FUSE HOLDER (MINI, Phillips Head style) - Aquabot Turbo T4RC (Version 2006 - Present) |
|
7211 |
FUSE (3 Amp, MINI, 250 Volt, Slow-Blow) - Aquabot Turbo T4RC (Version 2006 - Present) |
| 114 |
7105 |
LIGHTED SWITCH (Thin, 1¼" x ½", Red with Light, 3-Wire) - Use for Power Supply |
| 114 |
7208 |
NON-LIGHTED SWITCH (Thin, 1¼" x ½", Red, 3-Wire) - Use for Power Supply with Dial or Digital Timer |
| 115 |
7023 |
ANTENNA (4", only authorized technician should install included Hardware) - Aquabot Turbo T4RC |
|
A220204KIT |
RECEIVER & TRANSMITTER KIT - Aquabot Turbo T4RC -KIT includes matched 220114C Radio RC Transmitter (Grey / Yellow face) and A220204FCC Receiver |
|
A220204FCC |
RECEIVER (Radio, 4-Way) - Aquabot Turbo T4RC - - - - - - - - Responds to 220114C Transmitter |
| 116 |
220114C |
TRANSMITTER (Radio RC, Grey & Yellow/ Blue▲▲▲/ Red LED light) - Aquabot Turbo T4RC -- -- -- Transmits to A220204FCC Receiver |
| 117 |
7041A |
HANDLE (Plastic, with Hardware) |
| 118 |
7102 |
CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) |
| 119 |
7074D |
DIGITAL TIMER (Front Digital display, 1-7 hours Adjustable) - Aquabot Turbo T4RC (Version 2006 - Present) |
|
|
|
|
800070 |
NOVUS 2 Plastic Polish 24 oz. Bottle - Polish for the plastic components |
|
1609 |
TIE (Blue, #4, Plastic, reusable) - Use for coiling the Cable Assembly among other things |
|
|
| |
|
|
|
|
|
|
|
